Safety Measures for Electrical Room
CONFINED SPACE SAFETY TRAINING
RISK MANAGEMENT ( With Pictures )
Electrical room are highly
hazardous because electrical energy, the following safety measures to be
ensured in the electrical room.
i) As per IS 2551, The Electrical
Installations for Medium, High and Extra high voltage shall have a danger
notice both in English or Hindi and local language of the district with a sign
of skulls and bones.
ii) Displays: Minimum PPE
requirement, Hazards & precautions to be taken, Unauthorized Access
Prohibited Signage, Schematic layout of the Electrical Area with emergency
Equipment location etc. are to be displayed at the entrance of Electrical Room.
FREE FREE - Training Module on WELDING
iii) Electrical Shock Treatment Chart
with instructions in English or Hindi and the local language of the district
and where Hindi is the local language, in English and Hindi for the restoration
of persons suffering from electric shock have to be affixed in a conspicuous
place.
iv) SLD - Single Line Diagram to be
displayed inside Electrical rooms.
v) The EAP - Emergency Action Plan
with Emergency contact numbers, Employees’ name who are trained on CPR &
first aid to be displayed in Electrical rooms.
vi) First aid boxes, stretchers, ambu
bag, Gas Mask etc to be made available in Electrical rooms or near vicinity.
vii) The Electrical Installations
for high and extra high voltage shall have a running tap of drinking water and
Emergency Safety shower with drinking water connection and proper drainage
facility. In case of electric burns, the burnt portion should be cooled down
using drinking water. In every manned high and extra high voltage sub section,
an artificial respirator to be provided.
viii) No scrap materials to be
stored in the electrical room. Good housekeeping to be maintained within the
electrical room. The floor of Electrical Substation should be kept free from
slip/ trip/ fall hazard like open cable riser, moving checker plate or floor
board etc.
ix) Along with the main exit door,
Emergency Exit door is to be provided and should be in accessible safe
condition in the 415V and above electrical rooms.
GAS CUTTING SET, STAND DRILLING M/C, GENERATOR - CHECKLIST WITH PICTURES
No comments:
Post a Comment