SAFETY/HSE INTERVIEW QUESTION & ANSWER - VII
Give a
brief note about crane and LE?
1. Only authorized and competent person should operate cranes
2. The correct sling must be used for the load to be lifted
3. Lifting equipment must be certified from competent authority
and mark with its SWL
4. Never be used for loads excess of its SWL
5. Cables and slings must be padded when passing over sharp edges
of equipment's
6. Check the condition of the ground before parking the crane and
use out riggers
7. All moving parts must be guarded
8. Uncertified chains, ropes, slings and hooks should not be used
9. All slings to be inspected by third party inspectors
10. Never stand or work under a suspended load
11. Place the out riggers on firms ground
12. Guide ropes shall be used to control swing of lifted material
13. Never operate the crane at the time of wind speed is abnormal
14. Lifting over live equipment should not be encouraged
15. The crane should undergo periodical maintenance as per manufactures
16. Lifting plan to be prepared and discussed before the execution
17. Movement of men should be restricted in the crane swing area
PART 2 - SAFETY INDUCTION IN HINDI
Give
brief note about fork lift truck?
1. Check breaks, lift tilt and tires.
2. Check the stability of load before moving it
3. Never leave your fork lift truck unattended with motor running
4. Never park fork lift truck on passage way
5. Never drive with wet or greasy hands
6. Always drive with a safe speed and slow down at turning point
7. When driving without load forks about 6 inches above the floor
or ground
8. Never operate truck in gaseous area
9. Never carry a load so high that you cannot head, If necessary
operate truck in reverse
10. Avoid carrying lose materials on forks
11. Never allow one to go under elevated loads
12. Warn other employees to stand clear when staking or removing
materials
13. Exhaust pipe should have flame arrestor
14. Fork should be lowered to the floor when the truck is
unattended
15. Stay alert all times
16. Do not allow workmen to sit on fork
Give a
brief about grinding?
1. Proper wheel shall be used a per the grinding M/c’s
specification
2. All the grinding M/c’s shall be used with wheel guard
3. Grinding cables shall not mingle with welding cables
4. All the cables shall be protected from damage
5. Provide face shield with safety helmet
6. Never use fracture wheel
7. Excessive tightening of wheel is dangerous
8. All guards should be in position before the machine operated
9. The speed of the grinding should match in the speeds of the
grinding machines
10. Only skilled person should handle this work
11. Testing of wheel is necessary
12. Always maintain proper angle of position while grinding
Precaution
of excavation?
1. Excavation area should be suitably barricaded
2. Put sign boards lights and flags
3. Avoid heavy vehicle coming near the sides
4. PPE like helmet, safety shoes should be used
5. Keep the excavated soil at least 5 feet distance
6. Excavated sides should be sloped bake to a safe angle
7. Hand excavation should be done at the present of UG pipes or
cables place
8. Cutting shall be done from top to bottom
9. All narrow trenches 4 feet or more deep shall be supplied at
least one ladder
10. While excavating on the slope on the slope whose height is
over 10 feet men should use safety belts
12. Ensure the proper shoring
