Hight Work | Work at Height | Permit To Work (PTW)Template Sample | Example Form Word Document Free
Height Work or Working at height(WAH) remains
one of the biggest causes of fatalities and major injuries. Common cases
include falls from roofs, ladders, and through fragile surfaces. ‘Work at
height’ means work in any place where, if there were no precautions in place, a
person could fall a distance liable to cause personal injury (for example a
fall through a fragile roof down an unprotected lift shaft, stairwells).
Control Measures for Work at Height
Employers should first assess the risks. Factors to weigh up include the height of the task, the duration and frequency, and the condition of the surface being worked on.
Before working at height employer & employees work through these simple steps:
Avoid work at height where it’s reasonably
practicable to do so;
Where work at height cannot be easily avoided, prevent falls using either an existing place of work that is already safe or the right type of equipment
Minimize the distance and consequences of a
fall, by using the right type of equipment where the risk cannot be eliminated.
For each step, always consider measures that
protect everyone at risk (collective protection) before measures that only
protect the individual (personal protection).
Collective protection is equipment that does not require the person working at height to act for it to be effective. Examples are permanent or temporary guardrails, scissor lifts and tower scaffolds.
Personal protection is equipment that requires
the individual to act for it to be effective.
An example is putting on a safety harness
correctly and connecting it, with an energy-absorbing lanyard, to a suitable
anchor point.
PERMIT TO WORK / WORK PERMIT INTERVIEW QUESTION & ANSWER
Working at height - Dos and Don’ts
Do…
Work as much as possible from the ground;
Work off scaffolding in preference to working
off ladders
Ensure workers can get safely to and from where
they work at height;
Ensure equipment is suitable, stable and strong
enough for the job, maintained and checked regularly;
Take precautions when working on or near
fragile surfaces;
Provide protection from falling objects;
Store materials properly and ensure its secured
Consider emergency evacuation and rescue
procedures.
Don’t…
Don’t overload ladders – consider the equipment
or materials workers are carrying before working at height. Check the pictogram
or label on the ladder for information
Do not overreach on ladders or stepladders;
Do not rest a ladder against weak upper
surfaces, e.g. glazing or plastic gutters;
Do not use ladders or stepladders for strenuous
or heavy tasks, only use them for light work of short duration ( for example a
maximum of 30 minutes at a time);
Do not let anyone who is not competent (who
doesn’t have the skills, knowledge and experience to do the job) work at
height.
Do not store materials in the edge of the platforms
DOWNLOAD HERE : WORK AT HEIGHT PTW SAMPLE
Hight Work | Work at Height | Permit To Work ( PTW )Template Sample | Example Form Word Document Free
welldone . nice
ReplyDeletenice
ReplyDelete