Do's
Allow only the Licensed / Government approved wireman /
electricians for all repairs / maintenance of electrical wiring, plugs, switch
boards.
Carry out electricals works only after switching off the
electrical supply.
Change immediately old and damaged wiring where insulation
has been damaged.
Avoid joints in the wiring.
Loose wiring results in sparking. Ensure that wires are
tightened at both ends.
All on / off switches of electrical appliances should have
easy access. Remove obstructions if any in their way.
Select appropriate size of fuse wire / MCB's for main fuse
and circuit fuse.
In case of fire from electrical circuits, switch off the
supply immediately and use sand, carbon dioxide or dry powder extinguishers. Do
not use water.
Effective earthing should be provided to all electrical
appliances. Install Earth Leakage Circuit Breakers on the electric line will
prevent shocks. Earthing should not be done on water / steam pipes / iron rods
of the slab.
Install an indicator light for an electric heater and an
auto temperature control switch.
WELDING AND GAS CUTTING SAFETY IN
HINDI
Use properly earthed 3 pin plugs for all electrical
appliances. Electrical appliances should be kept away from damp and hot surface
and from flammable goods. Dim or flickering lights, sparks, buzzing sound from
electrical appliances are signs of potential hazards, contact qualified
electrical person immediately.
Install a switches and plugs at a heights out of reach of
children.
Use rubber mats near fridge, heater, electric cooking range
etc.
Main switchboard and meter should be safe and protected from
rain, wind dust. Meter Box should preferably be wooden and at height of 1.5
meters.
keep away from overhead lines and do not touch broken wires.
Don turn off appliances when you leave home.
Do wear rubber soled shoes when operating power tools.
Outdoor electrical outlets should be covered with weatherproof
covers.
WHY SHOULD IT BE INVESTIGATED?
Dont's
Don't go near to any place where 'danger' caution board is
placed.
Don't tamper with electric meter.
Don't use broken fittings; replace broken switches /
fittings immediately.
Don't use metallic wire near electric lines for hanging wet
clothes.
Don't carry out construction in proximity of electric lines.
Don't touch switches / plugs with wet hands.
Don't dry clothes on electric wires.
Don't insert more than one plug in socket. While removing
pin from plug socket, pull the plug top and not the wire.
Don't overload outlets.
Don't ignore flickering lights, blown fuses or sparks.
Don't use older extension cords without inspecting them
first.
Don't assume that your house is wired safely.
Don't ignore switches or outlets that don't work.
Don't use electrical appliance or talk on the phone during
an electric storm.
Don't mix water and electricity.
Don't insert wire directly into the plug socket without a
matching plug pin to use any electrical appliances even on temporary basis.
FREE FREE - Training Module on WELDING
Don't touch a bare wire i.e. without insulation, it may be
live.
Don't make any temporary joints in the wiring without proper
insulation.
Don't provide fuse on neutral circuit.
Don't use any appliance, heater, electric iron, cooler
without proper earthing.
Don't provide higher size fuse wire than the prescribed
size.
Don't use wet hand to switch On and switch OFF the
electricity.
Don't disconnect a plug by pulling the wires when switch in
ON.
Don't switch On, the socket switch unless the plug is
completely inserted.
Don't connect earthing wire with water taps, this may be
hazardous.
Don't use water on the electrical equipment, to extinguish
the fire, switch OFF the supply.
FREE - ISO 45001 AUDIT CHECKLIST : PART 2
need pdf copy
ReplyDeletePls send pdf file and some electrical safety poster for Pre cast yard
DeletePlz share me electrical safety pdf
ReplyDeletePDF copy
ReplyDelete